Results 1 to 11 of 11

Thread: Whats Wrong with my Car? [gas smell, loss of power, rough idle]

Hybrid View

  1. #1
    iamgraphicdesign uproot's Avatar
    Join Date
    Mar 2005
    Location
    :noitacoL
    Age
    42
    Posts
    7,332
    Rep Power
    34

    Default Whats Wrong with my Car? [gas smell, loss of power, rough idle]

    Well i started getting a gas smell when driving, and sometimes the car would have a hard time starting.

    Then all of a sudden the other night when i was beginning to accelerate it felt like i had lost virtually all of my power, and the idle is very odd. it's kinda like my car is grumbling, and struggling to move... any ideas on what could be wrong?

    One time a fuel injector went out and it seemed kinda like the problem i have now.... just wanting to get some opinions/advice...




    in short: hard to start , rough idle, no power, gas smell

  2. #2
    ‹^›‹(ςΏσ)›‹^›
    Join Date
    Jul 2003
    Age
    42
    Posts
    6,618
    Rep Power
    30

    Default

    Well.... there's only so many pieces in the fuel system... I'd check the filter and lines first.... are you seeing any gas leaking underneath the car when the system is pressurized?
    Chris
    91' Mustang GT
    512rwhp/468ft-lb

  3. #3
    Rock the 40oz GTScoob's Avatar
    Join Date
    Mar 2005
    Location
    GA Tech
    Age
    40
    Posts
    2,717
    Rep Power
    23

    Default

    Have you checked your MAF or MAP sensor?

    My car ran very shitty and then I popped it out and saw how crudded up it was (damn K&N cleaner oil).
    02 WRX Sport Wagon


  4. #4
    Certified Gearhead
    Join Date
    Jul 2005
    Location
    buford
    Age
    40
    Posts
    451
    Rep Power
    0

    Default

    sounds like a gas leak
    If it doesn't fit force it. If it breaks it was meant to be upgraded!
    If it doesn't break you wern't driving hard enough!

  5. #5
    iamgraphicdesign uproot's Avatar
    Join Date
    Mar 2005
    Location
    :noitacoL
    Age
    42
    Posts
    7,332
    Rep Power
    34

    Default

    looks like there is a leak around the fuel pulsation damper on the end of my fuel rail... a friend of mine said i could just tighten it up.. but i tried and it didnt move lol.... what should i do?
    Attached Thumbnails Attached Thumbnails -fuelrail-jpg  

  6. #6
    Certified Gearhead
    Join Date
    Jul 2005
    Location
    buford
    Age
    40
    Posts
    451
    Rep Power
    0

    Default

    replace it
    If it doesn't fit force it. If it breaks it was meant to be upgraded!
    If it doesn't break you wern't driving hard enough!

  7. #7
    Drifter/Kneedragger
    Join Date
    Nov 2002
    Location
    Buford, GA, USA
    Posts
    6,528
    Rep Power
    30

    Default

    Quote Originally Posted by uproot
    looks like there is a leak around the fuel pulsation damper on the end of my fuel rail... a friend of mine said i could just tighten it up.. but i tried and it didnt move lol.... what should i do?

    if it's leaking from the threads, pull it off and add some kind of fuel resistant sealant to the threads and reinstall. if it's coming from somewhere else just replace it.

  8. #8
    iamgraphicdesign uproot's Avatar
    Join Date
    Mar 2005
    Location
    :noitacoL
    Age
    42
    Posts
    7,332
    Rep Power
    34

    Default

    is the damper replaceable or should i get a new fuel rail... i've never had to work with the fuel lines so this is all new to me...

  9. #9
    Drifter/Kneedragger
    Join Date
    Nov 2002
    Location
    Buford, GA, USA
    Posts
    6,528
    Rep Power
    30

    Default

    Quote Originally Posted by uproot
    is the damper replaceable or should i get a new fuel rail... i've never had to work with the fuel lines so this is all new to me...

    from the diagram above it looks to have a hex shaped surface with which to remove it, so i'd assume it's threaded into the end of the rail.

  10. #10

    Default

    there are washers on there ..They are what keeps it from leaking..Replace those. I bet one got krimpped...
    2009 zx10R
    2005 919
    2006 xt225 dual sport

  11. #11
    iamgraphicdesign uproot's Avatar
    Join Date
    Mar 2005
    Location
    :noitacoL
    Age
    42
    Posts
    7,332
    Rep Power
    34

    Default

    Quote Originally Posted by Goinfasterthanu
    there are washers on there ..They are what keeps it from leaking..Replace those. I bet one got krimpped...
    i'm finally off work tomorrow.... that sounds like what it could be... thanks for the tips..

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
ImportAtlanta is a community of gearheads and car enthusiasts. It does not matter what kind of car or bike you drive, IA is an open community for any gearhead. Whether you're looking for advice on a performance build or posting your wheels for sale, you're welcome here!
Announcement
Welcome back to ImportAtlanta. We are currently undergoing many changes, so please report any issues you encounter with the site using the 'Contact Us' button below. Thank you!